The clock bits congfig table.
This table is used to configure the BITS clock source.
The indexes of the table are hwClockBitsCfgChassisIndex, hwClockBitsCfgBitsIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.1 |
hwClockBitsCfgChassisIndex |
Integer32{(1,2147483647)} |
not-accessible |
The index of the chassis whitch the clock source belongs to. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.2 |
hwClockBitsCfgBitsIndex |
Integer32{(1,10)} |
not-accessible |
The index of BITS clock. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.3 |
hwClockBitsCfgName |
OCTET STRING |
read-only |
The name of clock. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.4 |
hwClockBitsCfgBitsPortType |
INTEGER{portRj45(1),portSMB(2)} |
read-only |
The BITS port type. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.5 |
hwClockBitsCfgBitsType |
INTEGER{type2Mbps(0),type2Mhz(1),typeDclsTime(2),type1ppsTod(3),none(4),type1544Mbps(5)} |
read-write |
The BITS type. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.6 |
hwClockBitsCfgDirection |
INTEGER{in(1),out(2),inAndOut(3),none(4)} |
read-write |
The direction of BITS. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.7 |
hwClockBitsCfgRecvSaBit |
INTEGER{sa4(4),sa5(5),sa6(6),sa7(7),sa8(8)} |
read-write |
The received SA bit. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.8 |
hwClockBitsCfgSendSaBit |
INTEGER{sa4(4),sa5(5),sa6(6),sa7(7),sa8(8)} |
read-write |
The sent SA bit. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.10 |
hwClockBitsCfgSaBit |
INTEGER{sa4(4),sa5(5),sa6(6),sa7(7),sa8(8)} |
read-write |
The SA bit of SSM information. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.13 |
hwClockBitsCfgInvalidCond |
INTEGER{no(1),ais(2),lof(3)} |
read-write |
The invalid condition of clock source. |
The actually supported access is read-only. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.14 |
hwClockBitsCfgSourceId |
Integer32 |
read-only |
The clock source ID. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1.15 |
hwClockBitsCfgTodSignal |
INTEGER{nmea(1),ubx(2),none(3),ccsa(4),ccsaopt2(5),g8271(6)} |
read-write |
The tod signal of clock source. |
The actually supported access is read-only. |