The table contains loss measure information of DCP test instances.
The indexes of the table are hwIpfpmDcpInstId, hwIpfpmDcpLossTlpRole.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.316.2.1.12.1.1 |
hwIpfpmDcpLossEnable |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object indicates that the on-demand loss measure function is 'enabled(1)' or 'disabled(2)'. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.316.2.1.12.1.2 |
hwIpfpmDcpLossContEnable |
INTEGER{enabled(1),disabled(2)} |
read-write |
This object indicates that the continual loss measure function is 'enabled(1)' or 'disabled(2)'. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.316.2.1.12.1.3 |
hwIpfpmDcpLossTimeRange |
INTEGER{null(0),timerange5m(5),timerange10m(10),timerange15m(15),timerange30m(30)} |
read-write |
The time range in which the on-demand loss measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.316.2.1.12.1.4 |
hwIpfpmDcpLossTlpRole |
INTEGER{e2e(1),section(2)} |
not-accessible |
The type of TLP that loss measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point. |
This object is implemented as defined in the corresponding MIB files. |