This table specifies per-LSP MPLS OAM capability and associated information, such as DetectType, DetectFrequency.
The indexes of the table are hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId.
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
---|---|---|---|---|---|
1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 |
hwMplsOamEgrLspName |
OCTET STRING |
accessible-for-notify |
The object indicates the name of static LSP at egress. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 |
hwMplsOamEgrLsrId |
IpAddress |
accessible-for-notify |
The object indicates the Ingress LSR ID of the LSP. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 |
hwMplsOamEgrSessTunnId |
Integer32{(0,65535)} |
accessible-for-notify |
The object indicates the the Ingress session tunnel ID of the LSP.. |
This object is implemented as defined in the corresponding MIB files. |
1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 |
hwMplsOamEgrAvaState |
INTEGER{available(0),unavailable(1)} |
read-only |
If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP re-enters the Available state after the LSP Defect State. first exists. T1 defines the length of time the LSP is in the Defect state before declaring an LSP Unavailable or returning to defect free state 0: available state; 1: unavailable state. |
The actually supported access is accessible-for-notify. |
1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 |
hwMplsOamEgrDefectType |
INTEGER{nondefect(0),dServer(1),dPeerMe(2),dLOCV(3),dTTSIMismatch(4),dTTSIMismerge(5),dExcess(6),dUnknown(7),dOamFail(8),dEgressDown(9)} |
read-only |
0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.; 6: dExcess, Receiving excess rate of CV/FFD; 7: dUnknown, Unknown defect in the MPLS network. 8: dOamFail, AutoProtocal timer expires. 9: dEgressDown. |
The actually supported access is accessible-for-notify. |