hwMplsOamL2vcTable

1.3.6.1.4.1.2011.5.12.7.1.1.6.1.1

hwMplsOamL2vcPeerIp

IpAddress

accessible-for-notify

This object indicates the peer ip address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.6.1.2

hwMplsOamL2vcVcType

INTEGER{fr(1),atmAal5Sdu(2),atmTransCell(3),vlan(4),ethernet(5),hdlc(6),ppp(7),atmNto1Vcc(9),atmNto1Vpc(10),ipLayer2(11),atm1to1Vcc(12),atm1to1Vpc(13),atmAal5Pdu(14),cep(16),satopE1(17),satopT1(18),cesopsnBasic(21),ipInterworking(64),unknown(0)}

accessible-for-notify

There are seventeen types of vc.

1: fr;

2: atmAal5Sdu;

3: atmTransCell;

4: vlan;

5: ethernet;

6: hdlc;

7: ppp;

9: atmNto1Vcc;

10:atmNto1Vpc;

11:ipLayer2;

12:atm1to1Vcc;

13:atm1to1Vpc;

14:atmAal5Pdu;

16:cep;

17:satopE1;

18:satopT1;

21:cesopsnBasic;

64:ipInterworking;

0:unknown.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.6.1.3

hwMplsOamL2vcVcId

Unsigned32

accessible-for-notify

This object indicates the vc id of pw type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.12.7.1.1.6.1.16

hwMplsOamL2vcAvaState

INTEGER{available(0),unavailable(1)}

read-only

0: available state;

1: unavailable state.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.12.7.1.1.6.1.17

hwMplsOamL2vcDefectType

INTEGER{nondefect(0),dServer(1),dPeerMe(2),dLOCV(3),dTTSIMismatch(4),dTTSIMismerge(5),dExcess(6),dUnknown(7),dOamFail(8),pwDown(9)}

read-only

0: no defect;

1: dServer,

2: dPeerMe,

3: dLOCV, Loss of Connectivity Verification defect;

4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;

5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;

6: dExcess, Receiving excess rate of CV/FFD;

7: dUnknown, Unknown defect in the MPLS network.

8: dOamFail, AutoProtocal timer expires.

9: pwDown, PW down.

The actually supported access is accessible-for-notify.

1.3.6.1.4.1.2011.5.12.7.1.1.6.1.18

hwMplsOamL2vcBdiDefectType

INTEGER{nondefect(0),dServer(1),dPeerMe(2),dLOCV(3),dTTSIMismatch(4),dTTSIMismerge(5),dExcess(6),dUnknown(7),dOamFail(8)}

read-only

0: no defect;

1: dServer,

2: dPeerMe,

3: dLOCV, Loss of Connectivity Verification defect;

4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;

5: dTTSIMismerge, Trail Termination Source Identifier Mismerge defect.;

6: dExcess, Receiving excess rate of CV/FFD;

7: dUnknown, Unknown defect in the MPLS network.

8: dOamFail, AutoProtocal timer expires.

The actually supported access is accessible-for-notify.