hwPWVcTable

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1

hwPWVcID

Unsigned32

not-accessible

Index for the conceptual row identifying a PW within

this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual

Circuit FEC Element'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2

hwPWVcType

INTEGER{frameRelayDlciMartini(1),atmAal5SduVccTransport(2),atmTransparentCellTransport(3),vlan(4),ethernet(5),hdlc(6),ppp(7),cem(8),atmN2OneVccCellTransport(9),atmN2OneVpcCellTransport(10),ipLayer2Transport(11),atmOne2OneVccCellMode(12),atmOne2OneVpcCellMode(13),atmAal5PduVccTransport(14),frameRelayPortMode(15),cep(16),saE1oP(17),saT1oP(18),saE3oP(19),saT3oP(20),cESoPsnBasicMode(21),tDMoIPbasicMode(22),l2VpnCESoPSNTDMwithCAS(23),l2VpnTDMoIPTDMwithCAS(24),frameRelayDlci(25),ipInterworking(64),unknown(255)}

not-accessible

The type of the Virtual Circuit.This value indicate the service to be carried over

this PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3

hwPWVcPeerAddrType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-create

Denotes the address type of the peer node. It should be

set to 'unknown' if PE/PW maintenance protocol is not used

and the address is unknown.

Currently, support 'ipv4' only.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4

hwPWVcPeerAddr

IpAddress

read-create

This object contain the value of the peer node address

of the PW/PE maintenance protocol entity. This object

SHOULD contain a value of all zeroes if not applicable

(hwPWVcPeerAddrType is 'unknown').

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5

hwPWVcStatus

INTEGER{up(1),down(2),plugout(3),backup(4)}

read-only

Indicates the status of the PW in the local node.

Currently, can't support 'plugout'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6

hwPWVcInboundLabel

Unsigned32

read-create

The value of this object identifies the incoming label value of a PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7

hwPWVcOutboundLabel

Unsigned32

read-create

The value of this object identifies the outgoing label value of a PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8

hwPWVcSwitchSign

INTEGER{staticTostatic(1),ldpTostatic(2),ldpToldp(3),upe(4)}

read-only

This object indicates the type of a switch PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9

hwPWVcSwitchID

Unsigned32

read-create

Used in the outgoing PW ID field within the 'Virtual

Circuit FEC Element' of the switch PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10

hwPWVcSwitchPeerAddrType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-create

Denotes the address type of the peer node of the switch PW.

It should be set to 'unknown' if PE/PW maintenance protocol

is not used and the address is unknown.

Currently, support 'ipv4' only.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11

hwPWVcSwitchPeerAddr

IpAddress

read-create

This object contain the value of the peer node address of the

switch PW of the PW/PE maintenance protocol entity. This object

SHOULD contain a value of all zeroes if not applicable

(hwPWVcSwitchPeerAddrType is 'unknown').

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12

hwPWVcSwitchInboundLabel

Unsigned32

read-create

The value of this object identifies the incoming label value of a switch PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13

hwPWVcSwitchOutboundLabel

Unsigned32

read-create

The value of this object identifies the outgoing label value of a switch PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14

hwPWVcGroupID

Unsigned32

read-create

Used in the Group ID field sent to the peer PWES

within the maintenance protocol used for PW setup.

Applicable if pwVcOwner equal 'pwIdFecSignaling' or

'l2tpControlProtocol', should be set to zero otherwise.

Currently, this value always be zero.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15

hwPWVcIfIndex

Integer32{(0,2147483647)}

read-create

Index of the interface (or the virtual interface)

associated with the PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16

hwPWVcAcStatus

INTEGER{up(1),down(2),plugout(3),notify(4),notifyDown(5),downNotify(6)}

read-only

Local AC status.

Currently, can't support 'plugout'.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17

hwPWVcACOAMStatus

INTEGER{up(1),down(2)}

read-only

Denotes the AC's protocol is operational or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18

hwPWVcMtu

Integer32{(0,0),(46,9600)}

read-create

If not equal zero, the optional Mtu object in the

signaling protocol will be sent with this value,

representing the locally supported MTU size over the

interface (or the virtual interface) associated with the

PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19

hwPWVcCtrlWord

INTEGER{enable(1),disable(2)}

read-create

If signaling is used for PW establishment, this object

indicates the status of the control word negotiation,

and in both signaling or manual configuration indicates

if CW is to be present or not for this PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20

hwPWVcVCCV

BITS{ccCw(0),ccAlert(1),ccLabel(2),cvIcmpping(3),cvLspping(4),cvBfd(5),ccTtl(6)}

read-create

The value of this object identifies the VCCV value of a PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22

hwPWVcMaxAtmCells

Unsigned32{(0,28)}

read-create

Indicates the max cell supported when vc type is atm.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23

hwPWVcTnlPolicyName

OCTET STRING{(0,39)}

read-create

Indicates the tunnel policy name used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26

hwPWVcTemplateName

OCTET STRING{(0,19)}

read-create

Indicates the PW template index referenced.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27

hwPWVcSecondary

INTEGER{true(1),false(2)}

read-create

Indicates whether or not the secondary PW is used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28

hwPWVcUpTime

Unsigned32

read-only

Indicates the duration when the PW keeps Up for

the last time, in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29

hwPWOAMSync

INTEGER{true(1),false(2)}

read-create

This object indicates whether OAM mapping is enabled.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30

hwPWVCForBfdIndex

Unsigned32

read-only

The index of PW for BFD.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31

hwPWVcDelayTime

Unsigned32

read-create

The reroute delay time.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32

hwPWVcReroutePolicy

INTEGER{delay(1),immediately(2),never(3),none(4),err(5),invalid(6),immediatelySwitch(7)}

read-create

Reroute policy.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33

hwPWVcResumeTime

Unsigned32

read-create

The reroute resume time.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34

hwPWVcRerouteReason

INTEGER{invalidReason(1),vcCreated(2),vcDeleted(3),ldpSessionDown(4),ldpSessionUp(5),receivedDifLabelOrMtu(6),receivedIntfParaMatching(7),receivedIntfParaUnMatched(8),receivedUnPassCbitCheck(9),receivedUnPassPwLoopCheck(10),receivedNewMapping(11),receivedNewMappingButRemoteVcDown(12),receivedWithdrawn(13),receivedLdpRelease(14),receivedLdpRequest(15),ldpGrEndProcessing(16),receivedRsvpMessage(17),interfaceUp(18),interfaceDown(19),interfaceEncapChanged(20),refresh(21),downloadAgain(22),tunnelUp(23),tunnelDown(24),receivedNewRlb(25),deletedRlb(26),vcCreatedOrTurnedToAnother(27),outInterInInvalidState(28),outInterInValidNow(29),ldpNotifiForward(30),ldpNotifiNotForward(31),pwRestart(32),downloadFtnAndIlmForEthTrunk(33),acOamFaultDetectDisable(34),remoteAcFault(35),remoteAcFaultResume(36),localAcFault(37),localAcFaultResume(38),remotePsnFault(39),remotePsnFaultResume(40),localPsnFault(41),localPsnFaultResume(42),bfdForPwStateChangeToDown(43),bfdForPwStateChangeToUp(44),bfdForPwStateChangeToAdminDown(45),bfdForPwDisable(46),manualSetEnable(47),manualSetDisable(48),delayTimeOut(49),resumeTimeOut(50),vrrpMaster(51),vrrpBackup(52),vrrpInit(53),vrrpDelete(54),vrrpTrack(55),undoVrrpTrack(56),lspPingTimeOut(57),vcDownWhenReceivedNewRLB(58),mtuMatched(59),mtuUnmatched(60),vsiShut(61),vsiResume(62),setAdminVSI(63),undosetAdminVSI(64),bvsiBindAc(65),bvsiUnbindAc(66),ivsiBindBVSI(67),ivsiUnbindBVSI(68),deletedVSI(69),reconstructFwdTable(70),mclagMaster(71),mclagBackup(72),adminPwUp(73),adminPwDown(74),vccvOk(75),vccvFailed(76),localIfnetOk(77),inVcLabelOk(78),localIfnetRelease(79),inVcLabelRelease(80),switchOverEnable(81),switchOverDisable(82),setBVSI(83),undoSetBVSI(84),shutdownBVSI(85),undoShutdownBVSI(86),notificationReceived(87),pwApsSwitch(88),routeUnreachable(89),routeReachable(90),aging(91),verification(92),tdmBitRateMatched(93),tdmBitRateUnmatched(94)}

read-only

Last reroute reason.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35

hwPWVcLastRerouteTime

Unsigned32

read-only

Last reroute time.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36

hwPWVcManualSetFault

INTEGER{true(1),false(2)}

read-create

This object indicates that faults on the primary or secondary PW are manually simulated.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37

hwPWVcActive

INTEGER{true(1),false(2)}

read-only

Denotes the current vc is active or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38

hwPWVcVrIfIndex

Integer32{(0,2147483647)}

read-create

The value of this object identifies the index of the AC interface bound to a management VRRP backup group.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39

hwPWVcVrID

Unsigned32{(0,255)}

read-create

The value of this object identifies the ID of a management VRRP backup group.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40

hwPWBFDDetectMultiplier

Unsigned32{(0,0),(3,50)}

read-create

The multiple of detection time.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41

hwPWBFDMinReceiveInterval

Unsigned32{(0,0),(3,1000)}

read-create

The value of this object identifies the minimum interval at which dynamic BFD packets are received.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42

hwPWBFDMinTransmitInterval

Unsigned32{(0,0),(3,1000)}

read-create

The value of this object identifies the minimum interval at which dynamic BFD packets are sent.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43

hwPWDynamicBFDDetect

INTEGER{true(1),false(2)}

read-create

This value indicates the capacitability to support dynamic BFD detect.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44

hwPWBFDRemoteVcID

Unsigned32{(0,4294967295)}

read-create

The value of this object identifies the VC ID of the peer PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45

hwPWEthOamType

INTEGER{ethOam1ag(1),ethOam3ah(2),noEthOamCfg(3)}

read-create

This value indicates the type of ETH OAM.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46

hwPWCfmMaIndex

Unsigned32{(0,4294967295)}

read-only

This value indicates the current CFM MA index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47

hwPWVcUpStartTime

OCTET STRING{(0,63)}

read-only

Specifies the time this PW status was Up(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48

hwPWVcUpSumTime

Unsigned32

read-only

Indicates the accumulated time when the VC is Up,

in seconds.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49

hwPWVcIfName

OCTET STRING{(0,63)}

read-only

Name of the interface (or the virtual interface)

associated with the PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51

hwPWVcRowStatus

INTEGER{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-create

RowStatus for this Table.

Restriction:

The row must be created by 'createAndGo' handle only.

Handle 'createAndWait' is forbidden.

Not support modifying configuration.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52

hwPWVcAtmPackOvertime

Unsigned32{(0,0),(100,50000)}

read-create

The value of this object identifies the ATM cell encapsulation period.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53

hwPWVcPwJitterBufferDepth

Unsigned32{(0,64)}

read-create

The value of this object identifies the jitter buffer depth for TDMoPSN.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54

hwPWVcPwTdmEncapsulationNum

Unsigned32{(0,40)}

read-create

The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55

hwPWVcPwIdleCode

Unsigned32{(0,255),(65535,65535)}

read-create

The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56

hwPWVcPwRtpHeader

Unsigned32

read-create

This object indicates the RTP header carried in a transparently transmitted TDM frame.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57

hwPWVcSwitchTnlPolicyName

OCTET STRING{(0,39)}

read-create

This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58

hwPWVcCfmMdIndex

Unsigned32{(0,4095),(4294967295,4294967295)}

read-only

This value indicates the current CFM MD index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59

hwPWVcCfmMaName

OCTET STRING{(0,43)}

read-create

This value indicates the current CFM MA name used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60

hwPWVcCfmMdName

OCTET STRING{(0,43)}

read-create

This value indicates the current CFM MD name used.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61

hwPWVcRawOrTagged

INTEGER{raw(1),tagged(2),rawTagNotConfiged(3)}

read-only

Specifies whether the raw or tagged is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62

hwPWVcInterworkingType

INTEGER{ipInterWorking(1),ipLayer2(2),ipUnknown(3)}

read-only

Specifies the interworking type of the VC entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63

hwPWVcCir

Unsigned32

read-create

Specifies the committed information rate, based on the VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64

hwPWVcPir

Unsigned32

read-create

Specifies the peak information rate, based on the VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65

hwPWVcQosProfile

OCTET STRING{(0,63)}

read-create

Specifies the QoS profile's name, based on the VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66

hwPWVcSwitchCir

Unsigned32

read-create

Specifies the committed information rate, based on the switch VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67

hwPWVcSwitchPir

Unsigned32

read-create

Specifies the peak information rate, based on the switch VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68

hwPWVcSwitchQosProfile

OCTET STRING{(0,63)}

read-create

Specifies the QoS profile's name, based on the switch VC entry.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69

hwPWVcTrigger

INTEGER{true(1),false(2)}

read-create

Specifies whether the PW remote interface shutdown or not.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73

hwPWVcQosParaFromPWT

INTEGER{cliOrMib(1),pwTemplate(2),unknown(3)}

read-only

This object indicates the configuration of the Qos parameters managed through command line or PW template.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74

hwPWVcBfdParaFromPWT

INTEGER{cliOrMib(1),pwTemplate(2),unknown(3)}

read-only

This object indicates the configuration of the Bfd parameters managed through command line or PW template.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75

hwPwVcNegotiateMode

INTEGER{slaveOrMaster(1),independent(2),unknown(3),frr(4)}

read-create

This object indicates the negotiation mode of the PW on the local node.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76

hwPwVcIsBypass

INTEGER{true(1),false(2)}

read-create

This object indicates whether the PW is the bypass PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77

hwPwVcIsAdmin

INTEGER{true(1),false(2)}

read-create

This object indicates whether the PW is the administrator PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78

hwPwVcAdminPwIfIndex

Integer32{(0,2147483647)}

read-create

This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79

hwPwVcAdminPwLinkStatus

INTEGER{up(1),down(2),unknown(3)}

read-only

This object indicates the status of the administrator PW after it is being tracked by the service PW.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84

hwPwVcSwitchBackupVcId

Unsigned32

read-create

This object indicates the VC ID of the switch backup PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85

hwPwVcSwitchBackupVcPeerAddrType

INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)}

read-only

This object indicates type of the IP address of the peer on the switch backup PW.

Currently, only IPv4 addresss are supported.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86

hwPwVcSwitchBackupVcPeerAddr

IpAddress

read-create

This object indicates the IP address of the peer on the switch backup PW.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87

hwPwVcSwitchBackupVcReceiveLabel

Unsigned32

read-only

This object indicates the inbound label of the switch backup VC.

For a static VC, the value of the inbound label ranges from 16 to 1023.

For a dynamic VC, the inbound label is automatically generated by the system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88

hwPwVcSwitchBackupVcSendLabel

Unsigned32

read-only

This object indicates the outbound label of the switch backup VC.

For a static VC, the value of the outbound label ranges from 0 to 1048575.

For a dynamic VC, the outbound label is automatically generated by the system.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89

hwPwVcSwitchBackupVcTnlPolicyName

OCTET STRING{(0,19)}

read-create

This object indicates the name of the tunnel policy of the switch backup VC.

The actually supported access is read-only.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93

hwPwVcSlaveMasterMode

INTEGER{slave(1),master(2),unknown(3),bypass(4)}

read-only

This object indicates whether the status of the VC is master or slave.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94

hwPwVcSwitchVcSlaveMasterMode

INTEGER{slave(1),master(2),unknown(3)}

read-only

This object indicates whether the status of the switch VC is master or slave.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95

hwPwVcSwitchBackupVcSlaveMasterMode

INTEGER{slave(1),master(2),unknown(3)}

read-only

This object indicates whether the status of the switch backup VC is master or slave.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96

hwPwVcSwitchVcActive

INTEGER{true(1),false(2)}

read-only

This object indicates whether the status of the switch VC is active or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97

hwPwVcSwitchBackupVcActive

INTEGER{true(1),false(2)}

read-only

This object indicates whether the status of the switch backup VC is active or not.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98

hwPwVcSwitchCwTrans

INTEGER{true(1),false(2)}

read-create

This object indicates whether the SPE support Control Word Transparent or not,default is false.

The actually supported access is read-only.