This table provides remote PW information for each local PW.
The indexes of the table are hwPWVcID, hwPWVcType.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.1 |
hwPWRemoteVcID |
Unsigned32 |
read-only |
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the remote PW. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.2 |
hwPWRemoteVcType |
INTEGER{frameRelayDlciMartini(1),atmAal5SduVccTransport(2),atmTransparentCellTransport(3),vlan(4),ethernet(5),hdlc(6),ppp(7),cem(8),atmN2OneVccCellTransport(9),atmN2OneVpcCellTransport(10),ipLayer2Transport(11),atmOne2OneVccCellMode(12),atmOne2OneVpcCellMode(13),atmAal5PduVccTransport(14),frameRelayPortMode(15),cep(16),saE1oP(17),saT1oP(18),saE3oP(19),saT3oP(20),cESoPsnBasicMode(21),tDMoIPbasicMode(22),l2VpnCESoPSNTDMwithCAS(23),l2VpnTDMoIPTDMwithCAS(24),frameRelayDlci(25),ipInterworking(64),unknown(255)} |
read-only |
This value indicate the service to be carried over the remote PW. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.3 |
hwPWRemoteVcStatus |
INTEGER{up(1),down(2),plugout(3)} |
read-only |
Indicates the forwarding status of the remote VC. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.4 |
hwPWRemoteVcGroupID |
Unsigned32 |
read-only |
Indicates the Group ID field of the remote PW. Currently, this value always be zero. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.5 |
hwPWRemoteVcMtu |
Unsigned32{(0,0),(46,9600)} |
read-only |
Indicates the supported MTU size of the remote PW. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.6 |
hwPWRemoteVcCtrlword |
INTEGER{enable(1),disable(2)} |
read-only |
Indicates the control word capability of the remote PW. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.7 |
hwPWRemoteVcMaxAtmCells |
Unsigned32{(0,65535)} |
read-only |
Indicates the max cell supported of the remote PW when vctype is atm. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.8 |
hwPWRemoteVcNotif |
INTEGER{true(1),false(2)} |
read-only |
Indicates notification is supported by the remote PW. |
This object is implemented as defined in the corresponding MIB files. |