mplsL3VpnVrfNumVrfRouteMaxThreshExceeded

1.3.6.1.2.1.10.166.11.0.4

mplsL3VpnVrfNumVrfRouteMaxThreshExceeded

• mplsL3VpnVrfPerfCurrNumRoutes
• mplsL3VpnVrfConfHighRteThresh

This notification is generated when the number of routes

contained by the specified VRF exceeds or attempts to exceed

the maximum allowed value as indicated by

mplsL3VpnVrfMaxRouteThreshold. In cases where

mplsL3VpnVrfConfHighRteThresh is set to the same value

as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh

need not be exceeded; rather, just reached for this notification

to be issued.

Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval

at which the this notification will be reissued after the

maximum value has been exceeded (or reached if

mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are

equal) and the initial notification has been issued. This value

is intended to prevent continuous generation of notifications by

an agent in the event that routes are continually added to a VRF

after it has reached its maximum value. The default value is 0

minutes. If this value is set to 0, the agent should only issue

a single notification at the time that the maximum threshold has

been reached, and should not issue any more notifications until

the value of routes has fallen below the configured threshold

value.

This object is implemented as defined in the corresponding MIB files.