mplsL3VpnNumVrfRouteMaxThreshCleared

1.3.6.1.2.1.10.166.11.0.6

mplsL3VpnNumVrfRouteMaxThreshCleared

• mplsL3VpnVrfPerfCurrNumRoutes
• mplsL3VpnVrfConfHighRteThresh

This notification is generated only after the number of routes

contained by the specified VRF exceeds or attempts to exceed

the maximum allowed value as indicated by

mplsVrfMaxRouteThreshold, and then falls below this value. The

emission of this notification informs the operator that the

error condition has been cleared without the operator having to

query the device.

Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at

which the mplsNumVrfRouteMaxThreshExceeded notification will

be reissued after the maximum value has been exceeded (or

reached if mplsL3VpnVrfConfMaxRoutes and

mplsL3VpnVrfConfHighRteThresh are equal) and the initial

notification has been issued. Therefore,

the generation of this notification should also be emitted with

this same frequency (assuming that the error condition is

cleared). Specifically, if the error condition is reached and

cleared several times during the period of time specified in

mplsL3VpnVrfConfRteMxThrshTime, only a single notification will

be issued to indicate the first instance of the error condition

as well as the first time the error condition is cleared.

This behavior is intended to prevent continuous generation of

notifications by an agent in the event that routes are

continually added and removed to/from a VRF after it has

reached its maximum value. The default value is 0. If this

value is set to 0, the agent should issue a notification

whenever the maximum threshold has been cleared.

This object is implemented as defined in the corresponding MIB files.