Description: This table describes result information of a test instance.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
A GET operation is performed.
The test instance type must be ICMP, UDP, or TCP.
The nqaResultsIndex and nqaResultsHopIndex values must be 0.
The indexes of the table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaResultsIndex, nqaResultsHopIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.1 |
nqaResultsIndex |
Integer32{(0,'7fffffff'h)} |
not-accessible |
The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only contains icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute information. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.2 |
nqaResultsHopIndex |
Integer32{(0,255)} |
not-accessible |
The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.3 |
nqaResultsCompletions |
INTEGER{noResult(0),success(1),failure(2)} |
read-only |
The status of test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.4 |
nqaResultsTestAttempts |
Counter32 |
read-only |
The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted by human or system). The current number of test attempts. The value of this object MUST be started at 0. |
VPLS mac ping and VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.5 |
nqaResultsCurHopCount |
Gauge32 |
read-only |
It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry. The default value is 0. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.6 |
nqaResultsCurProbeCount |
Gauge32 |
read-only |
The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index. |
VPLS mac ping and VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.7 |
nqaResultsRTDOverThresholds |
Counter32 |
read-only |
The times of successful statistics test RTD (Round Trip Delay) over the threshold. |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.8 |
nqaResultsSumCompletionTime |
Counter32 |
read-only |
The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on. |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.9 |
nqaResultsSumCompletionTime2Low |
Counter32 |
read-only |
The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. Low/High order is defined where the binary number will look as follows: ************************************************* | High order 32 bits | Low order 32 bits | ************************************************* For example the number 4294967296 would have all Low order bits as '0' and the rightmost High order bit will be 1 (zeros,1). |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.10 |
nqaResultsSumCompletionTime2High |
Counter32 |
read-only |
The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfully. See the nqaResultsSumCompletionTime2Low object for a definition of Low/High Order. |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.11 |
nqaResultsCompletionTimeMin |
Gauge32 |
read-only |
The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for executing a test. |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.12 |
nqaResultsCompletionTimeMax |
Gauge32 |
read-only |
The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in executing a test. |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.13 |
nqaResultsDisconnects |
Counter32 |
read-only |
The times of consecutive failures. For connectionless protocol type of test, this number should be zero. |
VPLS mac ping and VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.14 |
nqaResultsTimeouts |
Counter32 |
read-only |
The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.15 |
nqaResultsBusies |
Counter32 |
read-only |
The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.16 |
nqaResultsNoConnections |
Counter32 |
read-only |
The number of occasions when a NQA operation could not be initiated because the connection to the target has not been established. For all other nqaAdminCtrlType this object will remain zero. This cannot occur for connectionless protocols, but may occur for connection oriented protocols, such as TCP. Since a NQA operation was never initiated, the completion time of these operations are not accumulated, nor do they increment nqaResultsCompletions. |
VPLS mac ping and VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.17 |
nqaResultsSequenceErrors |
Counter32 |
read-only |
The number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlType this object will remain zero.
When this has occurred some of the possible reasons maybe: - a duplicate packet was received - a response was received after it had timed-out - a corrupted packet was received and was not detected |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.18 |
nqaResultsDrops |
Counter32 |
read-only |
The times probes of the test dropped due to sending or connecting failure. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.19 |
nqaResultsAddressType |
INTEGER{unknown(0),ipv4(1),ipv6(2),ipv4z(3),ipv6z(4),dns(16)} |
read-only |
The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). |
VPLS mac ping and VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.20 |
nqaResultsAddress |
OCTET STRING{(0,255)} |
read-only |
The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests). |
VPLS mac ping and VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.21 |
nqaResultsProbeResponses |
Counter32 |
read-only |
Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses have been received. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.22 |
nqaResultsSentProbes |
Counter32 |
read-only |
The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported as 0 when no probes have been sent. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.23 |
nqaResultsLastGoodProbe |
OCTET STRING{(8,8),(11,11)} |
read-only |
Date and time when the last response was received for a probe. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.24 |
nqaResultsLastGoodPath |
OCTET STRING{(8,8),(11,11)} |
read-only |
The date and time when the last complete path was determined. |
VPLS mac ping do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.25 |
nqaResultsTestFinished |
INTEGER{noFinish(0),finish(1)} |
read-only |
The status of test execution. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.26 |
nqaResultsRttAvg |
Gauge32 |
read-only |
The average of RTTs that were successfully measured by tests. |
VPLS mac trace do not support. |
|
1.3.6.1.4.1.2011.5.25.111.4.1.1.27 |
nqaResultsLostPacketRatio |
Gauge32 |
read-only |
The ratio of the packets lost to all packets sent in the test. |
VPLS mac trace do not support. |
To access the latest test result, the following conditions needs to be satisfied.
The GET operation is performed.
The types of the test examples can only be ICMP, UDP, and TCP.
The values of nqaResultsIndex and nqaResultsHopIndex are 0.