Description: nqaJitterStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
A GET operation is performed.
The test instance type must be ICMP, UDP, or TCP.
The indexes of the table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterStatsIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.1 |
nqaJitterStatsIndex |
Integer32{(0,'7fffffff'h)} |
not-accessible |
The third index of jitter statistics table. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.2 |
nqaJitterStatsCompletions |
INTEGER{noResult(0),success(1),failure(2),negotiateFailed(3)} |
read-only |
The result of the test, which value can be noResult (0), success (1), failure (2) or negotiateFailed (3). If the test is still running, the value will be noResult (0). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.3 |
nqaJitterStatsRTDOverThresholds |
Counter32 |
read-only |
The number of tests that violate RTD (Round Trip Delay) threshold. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.4 |
nqaJitterStatsNumOfRTT |
Counter32 |
read-only |
The number of RTTs that are successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.5 |
nqaJitterStatsRTTSum |
Counter32 |
read-only |
The sum of RTTs that are successfully measured. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.6 |
nqaJitterStatsRTTSum2Low |
Counter32 |
read-only |
The sum of squares of RTTs that are successfully measured by tests (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.7 |
nqaJitterStatsRTTSum2High |
Counter32 |
read-only |
The sum of squares of RTTs that are successfully measured by tests (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.8 |
nqaJitterStatsRTTMin |
Gauge32 |
read-only |
The minimum of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.9 |
nqaJitterStatsRTTMax |
Gauge32 |
read-only |
The maximum of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.10 |
nqaJitterStatsMinOfPositivesSD |
Gauge32 |
read-only |
The minimum of absolute value of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.11 |
nqaJitterStatsMaxOfPositivesSD |
Gauge32 |
read-only |
The maximum of absolute value of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.12 |
nqaJitterStatsNumOfPositivesSD |
Counter32 |
read-only |
The number of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.13 |
nqaJitterStatsSumOfPositivesSD |
Counter32 |
read-only |
The sum of absolute value of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.14 |
nqaJitterStatsSum2OfPositivesSDLow |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.15 |
nqaJitterStatsSum2OfPositivesSDHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.16 |
nqaJitterStatsMinOfNegativesSD |
Gauge32 |
read-only |
The minimum of absolute value of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.17 |
nqaJitterStatsMaxOfNegativesSD |
Gauge32 |
read-only |
The maximum of absolute value of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.18 |
nqaJitterStatsNumOfNegativesSD |
Counter32 |
read-only |
The number of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.19 |
nqaJitterStatsSumOfNegativesSD |
Counter32 |
read-only |
The sum of absolute value of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.20 |
nqaJitterStatsSum2OfNegativesSDLow |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from source to destination (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.21 |
nqaJitterStatsSum2OfNegativesSDHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from source to destination (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.22 |
nqaJitterStatsMinOfPositivesDS |
Gauge32 |
read-only |
The minimum of absolute value of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.23 |
nqaJitterStatsMaxOfPositivesDS |
Gauge32 |
read-only |
The maximum of absolute value of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.24 |
nqaJitterStatsNumOfPositivesDS |
Counter32 |
read-only |
The number of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.25 |
nqaJitterStatsSumOfPositivesDS |
Counter32 |
read-only |
The sum of absolute value of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.26 |
nqaJitterStatsSum2OfPositivesDSLow |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.27 |
nqaJitterStatsSum2OfPositivesDSHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.28 |
nqaJitterStatsMinOfNegativesDS |
Gauge32 |
read-only |
The minimum of absolute value of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.29 |
nqaJitterStatsMaxOfNegativesDS |
Gauge32 |
read-only |
The maximum of absolute value of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.30 |
nqaJitterStatsNumOfNegativesDS |
Counter32 |
read-only |
The number of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.31 |
nqaJitterStatsSumOfNegativesDS |
Counter32 |
read-only |
The sum of absolute value of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.32 |
nqaJitterStatsSum2OfNegativesDSLow |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from destination to source (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.33 |
nqaJitterStatsSum2OfNegativesDSHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from destination to source (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.34 |
nqaJitterStatsPacketLossSD |
Counter32 |
read-only |
The number of packets lost when sent from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.35 |
nqaJitterStatsPacketLossDS |
Counter32 |
read-only |
The number of packets lost when sent from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.36 |
nqaJitterStatsPacketOutOfSequences |
Counter32 |
read-only |
The number of packets arrived out of sequence. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.37 |
nqaJitterStatsErrors |
Counter32 |
read-only |
The number of errors occurred in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.38 |
nqaJitterStatsBusies |
Counter32 |
read-only |
The number of occasions when a test couldn't be initialized because the previous test has not completed. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.39 |
nqaJitterStatsTimeouts |
Counter32 |
read-only |
The number of responses arrived over the time. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.40 |
nqaJitterStatsProbeResponses |
Counter32 |
read-only |
The number of responses from echo-server for the packets sent by the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.41 |
nqaJitterStatsSentProbes |
Counter32 |
read-only |
The number of packets sent in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.42 |
nqaJitterStatsDrops |
Counter32 |
read-only |
The number of packets that were sent failed in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.43 |
nqaJitterStatsTestFinished |
INTEGER{noFinish(0),finish(1)} |
read-only |
The status of the test, which value can be noFinish (0) or finish (1). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.44 |
nqaJitterStatsMaxDelaySD |
Gauge32 |
read-only |
The maximum of all OWD (One Way Delay) from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.45 |
nqaJitterStatsMaxDelayDS |
Gauge32 |
read-only |
The maximum of all OWD (One Way Delay) from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.46 |
nqaJitterStatsRTTAvg |
Gauge32 |
read-only |
The average of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.47 |
nqaJitterStatsPacketLossRatio |
Gauge32 |
read-only |
The ratio of the packets lost to all packets sent in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.48 |
nqaJitterStatsAvgJitter |
Gauge32 |
read-only |
The average of jitter values that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.49 |
nqaJitterStatsAvgJitterSD |
Gauge32 |
read-only |
The average of jitter values from source to destination that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.50 |
nqaJitterStatsAvgJitterDS |
Gauge32 |
read-only |
The average of jitter values from destination to source that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.51 |
nqaJitterStatsJitterOut |
OCTET STRING |
read-only |
Jitter (RFC1889) at responder. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.52 |
nqaJitterStatsJitterIn |
OCTET STRING |
read-only |
Jitter (RFC1889) at sender. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.53 |
nqaJitterStatsOWDOverThresholdsSD |
Counter32 |
read-only |
The number of tests that violate OWD (One Way Delay) threshold from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.54 |
nqaJitterStatsPktLossUnknown |
Counter32 |
read-only |
The number of packets lost for which we cannot determine the direction. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.55 |
nqaJitterStatsNumOfOWD |
Counter32 |
read-only |
The number of OWDs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.56 |
nqaJitterStatsOWSumSD |
Counter32 |
read-only |
The sum of OWDs that were successfully measured by tests from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.57 |
nqaJitterStatsOWSumDS |
Counter32 |
read-only |
The sum of OWDs that were successfully measured by tests from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.58 |
nqaJitterStatsOWDOverThresholdsDS |
Counter32 |
read-only |
The number of tests that violate OWD (One Way Delay) threshold from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.59 |
nqaJitterStatsOperOfIcpif |
Gauge32 |
read-only |
The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.60 |
nqaJitterStatsOperOfMos |
Gauge32 |
read-only |
The MOS (Mean Opinion Score) value for the latest jitter test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.61 |
nqaJitterStatsMinDelaySD |
Gauge32 |
read-only |
The minimum of all one way time from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.62 |
nqaJitterStatsSum2DelaySDLow |
Gauge32 |
read-only |
The low order 32 bits of the sum of squares of one way time from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.63 |
nqaJitterStatsSum2DelaySDHigh |
Counter32 |
read-only |
The high order 32 bits of the sum of squares of one way time from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.64 |
nqaJitterStatsMinDelayDS |
Gauge32 |
read-only |
The minimum of all one way time from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.65 |
nqaJitterStatsSum2DelayDSLow |
Gauge32 |
read-only |
The low order 32 bits of the sum of squares of one way time from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.66 |
nqaJitterStatsSum2DelayDSHigh |
Counter32 |
read-only |
The low order 32 bits of the sum of squares of one way time from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.67 |
nqaJitterStatsTimeUnit |
INTEGER{us(1),ms(2)} |
read-only |
The unit of the timestamp, ms or us. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.68 |
nqaJitterStatsAvgDelaySD |
Gauge32 |
read-only |
The average of one way time from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.69 |
nqaJitterStatsAvgDelayDS |
Gauge32 |
read-only |
The average of one way time from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.76 |
nqaJitterStatsJitterOverThresholdsSD |
Counter32 |
read-only |
The number of tests that violate jitter threshold from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.4.3.1.77 |
nqaJitterStatsJitterOverThresholdsDS |
Counter32 |
read-only |
The number of tests that violate jitter threshold from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
To access the latest test result, the following conditions needs to be satisfied.
The GET operation is performed.
The types of the test examples can only be ICMP, UDP, and TCP.