A table which contains the rolling accumulated history of the Jitter operation.
The indexes of the table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaJitterCollectStatsIndex.
|
OID |
Object |
Syntax |
Max Access |
Description |
Implemented Specifications |
|---|---|---|---|---|---|
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.1 |
nqaJitterCollectStatsIndex |
Integer32{(1,'7fffffff'h)} |
not-accessible |
The third index of jitter collection statistics table. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.2 |
nqaJitterCollectStatsCompletions |
Counter32 |
read-only |
The number of the tests that have completed successfully. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.3 |
nqaJitterCollectStatsRTDOverThresholds |
Counter32 |
read-only |
The number of tests that violate RTD (Round Trip Delay) threshold. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.4 |
nqaJitterCollectStatsOWDOverThresholdsSD |
Counter32 |
read-only |
The number of tests that violate OWD (One Way Delay) threshold from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.5 |
nqaJitterCollectStatsOWDOverThresholdsDS |
Counter32 |
read-only |
The number of tests that violate OWD (One Way Delay) threshold from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.6 |
nqaJitterCollectStatsNumOfRTT |
Counter32 |
read-only |
The number of RTTs that are successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.7 |
nqaJitterCollectStatsRTTSum |
Counter32 |
read-only |
The sum of RTTs that are successfully measured. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.8 |
nqaJitterCollectStatsRTTSum2Low |
Counter32 |
read-only |
The sum of squares of RTTs that are successfully measured by tests (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.9 |
nqaJitterCollectStatsRTTSum2High |
Counter32 |
read-only |
The sum of squares of RTTs that are successfully measured by tests (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.10 |
nqaJitterCollectStatsRTTMin |
Gauge32 |
read-only |
The minimum of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.11 |
nqaJitterCollectStatsRTTMax |
Gauge32 |
read-only |
The maximum of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.12 |
nqaJitterCollectStatsMinOfPositivesSD |
Gauge32 |
read-only |
The minimum of absolute value of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.13 |
nqaJitterCollectStatsMaxOfPositivesSD |
Gauge32 |
read-only |
The maximum of absolute value of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.14 |
nqaJitterCollectStatsNumOfPositivesSD |
Counter32 |
read-only |
The number of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.15 |
nqaJitterCollectStatsSumOfPositivesSD |
Counter32 |
read-only |
The sum of absolute value of all positive jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.16 |
nqaJitterCollectStatsSum2OfPositivesSDLow |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.17 |
nqaJitterCollectStatsSum2OfPositivesSDHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.18 |
nqaJitterCollectStatsMinOfNegativesSD |
Gauge32 |
read-only |
The minimum of absolute value of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.19 |
nqaJitterCollectStatsMaxOfNegativesSD |
Gauge32 |
read-only |
The maximum of absolute value of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.20 |
nqaJitterCollectStatsNumOfNegativesSD |
Counter32 |
read-only |
The number of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.21 |
nqaJitterCollectStatsSumOfNegativesSD |
Counter32 |
read-only |
The sum of absolute value of all negative jitter values from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.22 |
nqaJitterCollectStatsSum2OfNegativesSDLow |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from source to destination (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.23 |
nqaJitterCollectStatsSum2OfNegativesSDHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from source to destination (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.24 |
nqaJitterCollectStatsMinOfPositivesDS |
Gauge32 |
read-only |
The minimum of absolute value of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.25 |
nqaJitterCollectStatsMaxOfPositivesDS |
Gauge32 |
read-only |
The maximum of absolute value of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.26 |
nqaJitterCollectStatsNumOfPositivesDS |
Counter32 |
read-only |
The number of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.27 |
nqaJitterCollectStatsSumOfPositivesDS |
Counter32 |
read-only |
The sum of absolute value of all positive jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.28 |
nqaJitterCollectStatsSum2OfPositivesDSLow |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.29 |
nqaJitterCollectStatsSum2OfPositivesDSHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.30 |
nqaJitterCollectStatsMinOfNegativesDS |
Gauge32 |
read-only |
The minimum of absolute value of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.31 |
nqaJitterCollectStatsMaxOfNegativesDS |
Gauge32 |
read-only |
The maximum of absolute value of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.32 |
nqaJitterCollectStatsNumOfNegativesDS |
Counter32 |
read-only |
The number of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.33 |
nqaJitterCollectStatsSumOfNegativesDS |
Counter32 |
read-only |
The sum of absolute value of all negative jitter values from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.34 |
nqaJitterCollectStatsSum2OfNegativesDSLow |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from destination to source (low order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.35 |
nqaJitterCollectStatsSum2OfNegativesDSHigh |
Counter32 |
read-only |
The sum of squares of absolute value of all negative values from destination to source (high order 32 bits). |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.36 |
nqaJitterCollectStatsMaxDelaySD |
Gauge32 |
read-only |
The maximum of all OWD (One Way Delay) from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.37 |
nqaJitterCollectStatsMaxDelayDS |
Gauge32 |
read-only |
The maximum of all OWD (One Way Delay) from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.38 |
nqaJitterCollectStatsNumOfOWD |
Counter32 |
read-only |
The number of OWDs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.39 |
nqaJitterCollectStatsOWSumSD |
Counter32 |
read-only |
The sum of OWDs that were successfully measured by tests from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.40 |
nqaJitterCollectStatsOWSumDS |
Counter32 |
read-only |
The sum of OWDs that were successfully measured by tests from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.41 |
nqaJitterCollectStatsPacketLossSD |
Counter32 |
read-only |
The number of packets lost when sent from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.42 |
nqaJitterCollectStatsPacketLossDS |
Counter32 |
read-only |
The number of packets lost when sent from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.43 |
nqaJitterCollectStatsPacketLossUnknown |
Counter32 |
read-only |
The number of packets lost for which we cannot determine the direction. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.44 |
nqaJitterCollectStatsPacketOutOfSequences |
Counter32 |
read-only |
The number of packets arrived out of sequence. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.45 |
nqaJitterCollectStatsPacketLossRatio |
Gauge32 |
read-only |
The ratio of the packets lost to all packets sent in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.46 |
nqaJitterCollectStatsErrors |
Counter32 |
read-only |
The number of errors occurred in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.47 |
nqaJitterCollectStatsBusies |
Counter32 |
read-only |
The number of occasions when a test couldn't be initialized because the previous test has not completed. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.48 |
nqaJitterCollectStatsTimeouts |
Counter32 |
read-only |
The number of responses arrived over the time. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.49 |
nqaJitterCollectStatsProbeResponses |
Counter32 |
read-only |
The number of responses from echo-server for the packets sent by the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.50 |
nqaJitterCollectStatsSentProbes |
Counter32 |
read-only |
The number of packets sent in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.51 |
nqaJitterCollectStatsDrops |
Counter32 |
read-only |
The number of packets that were sent failed in the test. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.52 |
nqaJitterCollectStatsRTTAvg |
Gauge32 |
read-only |
The average of RTTs that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.53 |
nqaJitterCollectStatsAvgJitter |
Gauge32 |
read-only |
The average of jitter values that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.54 |
nqaJitterCollectStatsAvgJitterSD |
Gauge32 |
read-only |
The average of jitter values from source to destination that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.55 |
nqaJitterCollectStatsAvgJitterDS |
Gauge32 |
read-only |
The average of jitter values from destination to source that were successfully measured by tests. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.56 |
nqaJitterCollectStatsJitterOut |
OCTET STRING |
read-only |
Jitter (RFC1889) at responder. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.57 |
nqaJitterCollectStatsJitterIn |
OCTET STRING |
read-only |
Jitter (RFC1889) at sender. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.58 |
nqaJitterCollectStatsMinDelaySD |
Gauge32 |
read-only |
The minimum of all OWD (One Way Delay) from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.59 |
nqaJitterCollectStatsMinDelayDS |
Gauge32 |
read-only |
The minimum of all OWD (One Way Delay) from destination to source. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.60 |
nqaJitterCollectStatsAvgDelaySD |
Gauge32 |
read-only |
The average of all OWD (One Way Delay) from source to destination. |
This object is implemented as defined in the corresponding MIB files. |
|
1.3.6.1.4.1.2011.5.25.111.8.1.1.61 |
nqaJitterCollectStatsAvgDelayDS |
Gauge32 |
read-only |
The average of all OWD (One Way Delay) from destination to source. |
This object is implemented as defined in the corresponding MIB files. |