Checking the Configuration

After QPPB is configured, you can view QPPB information.

Context

You can run the display commands in any view to check QPPB running information. For details about QPPB running information, see the chapter "QoS Commands" in the HUAWEI NetEngine 8000 F Series Router Command Reference.

Procedure

  1. Run the display qppb local-policy configuration policy-name command to check the configuration of a specific QPPB local policy.
  2. Run the display qppb local-policy statistics interface interface-type interface-number [ qos-local-id qos-local-id ] { inbound | outbound } command to check the statistics about a specific QPPB local policy.
Parent Topic: Configuring Destination-Based QPPB
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic