Verifying the User management Configuration

After configuring user management, verify the configuration about the username generation mode and domain name parsing function.

Procedure

Run the display static-user command to check information about static users.
Run the display aaa configuration command to check the configuration of the domain name parsing function.
Run the display vlanpvc-to-username command to check the version in the IPoX username format.
Run the display call rate command to check the call put-through rates of different types of users.
Run the display access trigger user-table command to check information about users whose access packets are limited.
Run the display access-ip-number { interface interface-type interface-number | slot slot-id }^* user-type ppp command to check the configured number of IP addresses for PPP users who log in from a specified interface or a specified board.
Run the display access-user resource-usage [ slot slot-id ] command to check the user resource usage when the user resource usage on an interface board or main control board exceeds the alarm threshold.
Run the display trace access-user object [ object-id ] command to display the configurations of all the service objects to be traced or service objects with specified IDs.
Run the display aaa online-fail-record dhcp statistics command to check user login failure records.
Run the display access delay load-balance [ group group-name ] command to check information about a configured load balancing group.
Run the display capture-packet access config-state command to check the packet header obtaining configuration.
Run the display capture-packet access information [ slot slot-id [ instance instance-id ] ] start-index start-index end-index end-index command to check detailed information about obtained packet headers.