After configuring HQoS based on an FQ in enhanced 8-CoS mode, you can check the queue configuration as well as the QoS profile application and configuration on an interface.
Procedure
- Run the display flow-queue configuration [ verbose [ flow-queue-name ] ] command to check the configuration of an FQ profile, including the scheduling mode of an FQ, configured and actual weights for WFQ scheduling, shaping bandwidth, and applied flow-WRED object.
- Run the display qos-profile application { qos-profile-name } command to check the QoS profile application.
- Run the display qos-profile configuration [ qos-profile-name ] command to check the QoS profile configuration.
- Run the display qos-profile statistics vpn-instance vpnname { inbound | outbound } [ verbose ] command to check QoS profile statistics on all member interfaces in a VPN instance.
- Run the display qos-profile statistics vsi vsi-name { inbound | outbound } [ verbose ] command to check the QoS traffic statistics of a specified VSI.
- Run the display qos-profile statistics bridge-domain bd-id { inbound | outbound } [ verbose ] command to check the QoS traffic statistics of a specified BD.