(Optional) Configuring a Device to Send a Trap Message to an NMS When an Interface Physical Status Changes

You can enable a device to send a trap message to an NMS when the interface physical status changes. After this function is enabled, the NMS monitors the interface status in real time.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run enable snmp trap physical-updown

    The device is enabled to send a trap message to the NMS when the interface physical status changes.

  4. Run commit

    The configuration is committed.

Parent Topic: Interface Basics Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >