Enabling an Interface

Physical interfaces on a device are initialized and started when the device is powered on.

Context

This configuration process is supported only by the admin VS.

Procedure

  • By default, interfaces are started.
  • If an interface is shut down, perform the following steps to start the interface:
    1. Run system-view

      The system view is displayed.

    2. Run interface interface-type interface-number

      The interface view is displayed.

    3. Run undo shutdown

      The interface is started.

    4. Run commit

      The configuration is committed.

Parent Topic: Interface Basics Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >