(Optional) Configuring Power Locking and Gain Locking for an Optical Amplifier Module

You can configure power locking and gain locking for an optical amplifier module to amplify the optical power.

Perform the following steps on the router where power locking and gain locking need to be configured for an optical amplifier module.

Run system-view
The system view is displayed.
Run either of the following commands:
- Run the interface interface-type interface-number command to enter the view of a specified interface.
Run work-mode { agc agc-value | apc apc-value }
Power locking and gain locking are configured for the optical amplifier module.
Run commit
The configuration is committed.