Creating an L2VE Interface

This section describes how to configure an L2VE interface to terminate an L2VPN and how to bind the L2VE interface to a VE-Group.

Context

Perform the following steps on an NPE:

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface virtual-ethernet interface-number

    A VE interface is created and the VE interface view is displayed.

  3. Run ve-group ve-group-id l2-terminate

    The VE interface is configured as an L2VE interface to terminate an L2VPN and is bound to a VE-Group.

    • A VE-Group has only one L2VE interface and one L3VE interface. The two VE interfaces in a VE-Group must be on the same board.
    • When The L2VE interface and L3VE interface can be on the different boards when the VE interface is created with the interface global-ve command.

  4. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >