Binding the Virtual Template to an Interface

Bind a VT to an interface so that data on the interface can be transmitted based on parameters defined in the VT.

Context

After configuring a VT, bind it to an interface. The type of the interface to which a VT is bound varies depending on the user access type.

  • The VT configured for PPPoE services must be bound to an interface.

  • The VT configured for PPPoEoVLAN services must be bound to a sub-interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number [. subinterface-number ]

    The interface or sub-interface view is displayed.

    Specify an interface for PPPoE access users or a sub-interface for PPPoEoVLAN access users.

  3. Run pppoe-server bind virtual-template virtual-template-number

    A VT is bound to the interface or sub-interface.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring PPPoEv6 Access
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >