Verifying the PPPoEv6 Access Configuration

Procedure

• Run the display access-user command to check information about all access users.
• Run the display sub-interface interface-type interface-number pevlan pe-vlan-id [ cevlan ce-vlan-id ] command to check information about a sub-interface bound to a specified VLAN on an interface.
• Run the display bas-interface command to check information about the BAS interface.
• Run the display vlan-statistics interface interface-type interface-number.subinterface-number pevlan pe-vlan-id [ cevlan ce-vlan-id ] [ verbose ] command to check statistics about traffic and PPP packets on a specified sub-interface bound to a specified VLAN.
• Run the display vlan-statistics interface interface-type interface-number pevlan pe-vlan-id command to check statistics about traffic on a specified interface bound to a specified VLAN.
• Run the display ppp slot slot-number chasten-user [ mac-address mac-address ] command to check information about the PPP users that are forbidden to access the NetEngine 8000 F.
• Run the display ppp { user-id user-id | username username | ip-address ipv4-address [ vpn-instance instance-name ] | ipv6-address ipv6-address [ vpn-instance instance-name ] | circuit-id circuit-id-text | remote-id circuit-id-text } command to check information about the PPP status.
  

  Configuring the ui-mode type1 command in the system view influences the output format of the display command.