Configuring an Interface to Transparently Transmit LACP Packets

Context

This section describes how to configure an interface to transparently transmit LACP packets in a VLL scenario.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The AC interface view is displayed.

  3. Run link-protocol transport lacp

    The interface is configured to transparently transmit LACP packets.

  4. Run commit

    The configuration is committed.

Parent Topic: Layer 2 Protocol Tunneling Configuration (Not By Replacing Multicast Destination MAC Address)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >