Feature Requirements |
Series |
Models |
|---|---|---|
1. By default, hardware loopback is performed on VE interfaces, and only 33% to 50% of board bandwidth is available. In this case, HQoS scheduling is supported. You can manually change the hardware loopback mode to software loopback. 2. Software loopback is not supported in scenarios with any of the following types of packets: - BUM packets (VE interfaces support VPLS broadcast.) - Packets requring HQoS scheduling - Packets sent to the CPU (VLANIF broadcast packets and reserved multicast packets) - NetStream sampling packets - Mirrored packets - Packets that exceed the MTU and need to be fragmented Otherwise, services will be affected. |
NetEngine 8000 F |
NetEngine 8000 F2A/NetEngine 8000 F1A |