Configuring an Interface-based ACL6

An interface-based ACL6 defines rules to filter packets.

Usage Scenario

Figure 1 Configuring an interface-based ACL6

Interface 1 in this example is GE 0/1/0 respectively.

As shown in Figure 1, an ACL6 based on interface1 is created on Device A to allow Device A to permit all the packets sent from Network A to the Internet and deny all packets sent from Network B to the Internet.

(Optional) Creating a Validity Period for an ACL6 Rule

You can create a validity period for an ACL6 rule to control network traffic in a specified period.

Creating an Interface-based ACL6

You can create an interface-based ACL6 and configure parameters for the ACL6.

Configuring an Interface-based ACL6 Rule

Interface-based ACL6 rules are defined based on packets' inbound interfaces to filter packets.

Verifying the Configuration of Interface-based ACL6

After configuring an interface-based ACL6, verify the configuration.