Configuring a Basic ACL6

A basic ACL6 defines rules to filter packets.

Usage Scenario

Figure 1 Configuring a basic ACL6

Interfaces 1 through 2 in this example are GE 0/1/0, GE 0/1/8, respectively.

As shown in Figure 1, a basic ACL6 is created on Device A to allow Device A to permit all packets sent from Network A to the Internet and deny all packets sent from Network B and Network C to the Internet.

(Optional) Creating a Validity Period for an ACL6 Rule

You can create a validity period for an ACL6 rule to control network traffic in a specified period.

Creating a Basic ACL6

You can create a basic ACL6 and configure parameters for the ACL6.

Configuring a Basic ACL6 Rule

Basic ACL6 rules are defined based on whether the packets are the first fragments, packets' source IP addresses, and VPN instances to filter packets.

Applying a Basic ACL6

Basic ACL6s can be used in device management, QoS services, multicast packet filtering, and routing policies.

Verifying the Configuration of a Basic ACL6

After configuring a basic ACL6, verify the configuration.