If the clients of an RR are fully meshed, you can disable route reflection among them through the RR to reduce bandwidth consumption.
On some networks, if the clients of an RR have established IBGP peer relationships with each other, they can directly exchange routing information. Route reflection between the clients through the RR is unnecessary. In this case, disable route reflection among them through the RR.
The system view is displayed.
The BGP view is displayed.
The IPv6 unicast address family view is displayed.
Route reflection among clients through the RR is disabled.
If the clients of an RR have been fully meshed, you can run the undo reflect between-clients command to disable route reflection among the clients through the RR. The undo reflect between-clients command is run only on RRs.
The configuration is committed.