Configuring MP-IBGP Among PEs, ABRs, and ASBRs in the Same AS

Procedure

1. Run system-view

   The system view is displayed.

2. Run route-policy route-policy-name permit node node

   The routing policy is configured.

3. Run bgp as-number

   The BGP view is displayed.

4. Run peer peer-address as-number as-number

   The IBGP peer relationship is set up among the PEs, ABRs, and ASBRs in the same AS.

5. Run peer peer-address connect-interface loopback interface-number

   The loopback interface is specified as the outbound interface of the BGP session.

6. Run ipv4-family unicast

   The BGP-IPv4 address family view is displayed.

7. Run peer peer-address enable

   The function to exchange IPv4 routes among the PEs, ABRs, and ASBRs is enabled.

8. Run peer { group-name | ipv4-address } label-route-capability

   The PEs, ABRs, and ASBRs can receive and process labeled routes.

9. Run peer peer-address route-policy route-policy-name export

   The routing policy used to establish routes to peers is configured.

10. Run commit

    The configuration is committed.