IPv6 NG MVPN Configuration

Overview of IPv6 NG MVPN

An IPv6 NG MVPN is similar with the IPv4 NG MVPN whose framework is designed to transmit IP multicast traffic across a BGP/MPLS IP VPN. An NG MVPN uses BGP to transmit signaling information, and uses PIM-SM, PIM-SSM, P2MP TE, or mLDP to transmit data. The NG MVPN enables unicast and multicast services to be delivered using the same VPN architecture.

Configuration Precautions for IPv6 NG MVPN

Configuring an Intra-AS IPv6 NG MVPN

An IPv6 NG MVPN allows IP multicast services to run on BGP/MPLS IP VPNs, ensuring reliability, security, and efficiency of IP multicast services.

Configuring UMH Route Selection Rules

This section describes how to configure upstream multicast hop (UMH) route selection rules on receiver PEs on an IPv6 NG MVPN, so that the receiver PEs can select the same sender PE as their root node during VPN route selection.

Configuring Dual-Root 1+1 Protection

This section describes how to configure upstream multicast hop (UMH) route selection rules on receiver PEs on an NG MVPN, so that the receiver PEs can select the same sender PE as their root node during VPN route selection.

Configuration Examples for IPv6 NG MVPN

This section provides IPv6 NG MVPN configuration examples.