After configuring the DCI solution, check the VPN instance, EVPN instance, and VXLAN tunnel configurations.
Prerequisites
A DCI solution has been configured.
Procedure
- Run the display ip vpn-instance vpn-instance-name command to check brief information about a specified VPN instance.
- Run the display ip vpn-instance verbose vpn-instance-name command to check detailed information about a specified VPN instance, including information in the IPv4 address family of the VPN instance.
- Run the display ip vpn-instance [ vpn-instance-name ] interface command to view information about the interfaces bound to a specified VPN instance.
- Run the display evpn vpn-instance [ name vpn-instance-name ] command to check EVPN instance information.
- Run the display vxlan tunnel [ tunnel-id ] [ verbose ] command to check VXLAN tunnel information.
- Run the display evpn mac routing-table { all-evpn-instance | mac-address mac-address } command to check information about MAC routes of a specified EVPN instance.
- Run the display bgp evpn peer [ [ ipv4-address ] verbose ] command to check information about BGP EVPN peers.
- Run the display bgp evpn { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table mac-route command to check MAC route information.
- Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table command to check BGP VPNv4 route information.
- Run the display bgp vpnv6 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table command to check BGP VPNv6 route information.