Configuring an IP address

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface interface-type interface-number.subinterface-number

   The view of the Ethernet sub-interface that needs to be configured with an IP address is displayed.

3. Run ip address ip-address ip-mask [ sub ]

   An IP address is assigned to the Ethernet sub-interface.

   When two or more IP addresses are configured for an Ethernet sub-interface, the keyword sub can be used to indicate secondary IP addresses.

   For the detailed configuration of an IP address, see the NetEngine 8000 F Configuration Guide - IP Service.

4. Run commit

   The configuration is committed.

   

   In the scenario where an interface has a large number of sub-interfaces, if you run the shutdown command in the sub-interface view to shut down the sub-interfaces one after another, the work load is huge. To shut down the sub-interface in batch, run the shutdown interface command in the system view.