Verifying the Configuration of Interworking Between a VXLAN EVPN and a VPLS

Procedure

• Check the VPLS configurations.
  • Run the display vsi [ name vsi-name ] [ verbose ] command to check VSI information of the VPLS.
  • Run the display vpls connection [ ldp | vsi vsi-name ] [ down | up ] [ verbose ] command to check VPLS connections.
  • Run the display admin-vsi binding [ admin-vsi vsi-name ] command to check the binding relationship between a management VSI and a service VSI.
  • Run the display vsi { name vsi-name peer-info [ peer-ip-address ] | peer-info } command to check the PW status of the peer.
  • Run the display vsi name vsi-name protect-group [ group-name [ verbose | history ] ] command to check summary or detailed information about the PW protection group of a specified VSI, or PW switchover information about the PW protection group of a specified VSI.
• Check the EVPN and VXLAN configurations.
  • Run the display bridge-domain [ binding-info | bd-id [ brief | verbose | binding-info ] ] command to check BD configurations.
  • Run the display evpn vpn-instance [ vpn-instance-name ] command to check EVPN instance information.
  • Run the display bgp evpn all routing-table command to check BGP EVPN route information.
  • Run the display vxlan tunnel [ tunnel-id ] [ verbose ] command to check VXLAN tunnel information.