Verifying the EVPN L3VPN HVPN over MPLS Configuration

After configuring an EVPN L3VPN HVPN over MPLS, verify the configuration.

All EVPN L3VPN HVPN over MPLS configurations are complete.

Run the display ip routing-table vpn-instance vpn-instance-name or display ipv6 routing-table vpn-instance vpn-instance-name command on a UPE or an NPE to check the VPN routing table for default or specific routes sent by the remote end.
Run the display bgp evpn routing-table command on an EVPN-enabled UPE or NPE to check the EVPN routing table for EVPN routes sent by the remote end.