After configuring the NFVI distributed gateway function, verify the configuration.
Prerequisites
The NFVI distributed gateway configurations have been completed.
Procedure
- Run the display bgp { vpnv4 | vpnv6 } vpn-instance vpn-instance-name peer command on each DCGW to check whether the VPN BGP peer relationships between the DCGW and VNFs are Established.
- Run the display bgp vpnv4 vpn-instance vpn-instance-name routing-table or display bgp vpnv6 vpn-instance vpn-instance-name routing-table command on each DCGW to check whether the DCGW has received mobile phone routes from the VNF and whether the next hop of the routes is the VNF IP address.
- Run the display ip routing-table vpn-instance vpn-instance-name or display ipv6 routing-table vpn-instance vpn-instance-name command on each DCGW to check the DCGW's VPN routing table. The command output shows information about mobile phone routes and the outbound interfaces are VBDIF interfaces.