Verifying the GMPLS UNI Tunnel Configuration

After configuring a GMPLS UNI tunnel, you can view information about the GMPLS UNI tunnel and the tunnel status.

A GMPLS UNI tunnel has been configured.

Run the display lmp peer command to check information about LMP neighbors.
Run the display explicit-path [ path-name ] [ verbose ] command to check information about the configured explicit path.
Run the display mpls te gmpls tunnel path [ path-name ] [ verbose ] command to check GMPLS UNI tunnel path information.
Run the display mpls te gmpls tunnel c-hop [ tunnel-name tunnel-name ] [ lsp-id ingress-lsr-id egress-lsr-id tunnel-id lsp-id ] command to check information about the calculated path for a GMPLS UNI tunnel.
Run the display mpls gmpls lsp [ in-label in-label | incoming-interface interface-type interface-number | lsr-role { egress | ingress } | out-label out-label | outgoing-interface interface-type interface-number ] ^* [ verbose ] command to check GMPLS UNI LSP information.
Run the display mpls te gmpls tunnel [ name gmpls-tunnel-name ] [ verbose ] command to check information about a GMPLS UNI tunnel.
Run the display mpls te gmpls tunnel-interface [ name gmpls-tunnel-name ] command to check information about GMPLS UNI tunnel interfaces on the ingress EN and egress EN.