Configuring Basic IPv6 IS-IS Functions

This section describes how to configure basic IPv6 IS-IS functions for communication between nodes on an IPv6 IS-IS network. The configuration procedure includes configuring the IS-IS process and IS-IS interface.

Usage Scenario

To deploy IS-IS on an IPv6 network, configure basic IS-IS functions to implement communication between different nodes on the network.

Other IS-IS functions can be configured only after basic IS-IS functions are configured.

Configuring basic IPv6 IS-IS functions includes the following operations:
  1. Create IPv6 IS-IS processes.

  2. Configure IPv6 IS-IS interfaces.

Pre-configuration Tasks

Before configuring basic IPv6 IS-IS functions, complete the following tasks:

  • Configure a link layer protocol.

  • Assign an IPv6 address to each interface to ensure IP connectivity.

  • Enable the IPv6 in system view.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >