Verifying the Configuration

After configuring basic IPv6 IS-IS features, check information about IS-IS neighbors, interfaces, and routes.

Basic IPv6 IS-IS features have been configured.

Run the display isis name-table [ process-id | vpn-instance vpn-instance-name ] command to check the mapping from the name of the local device to the system ID.
Run the display isis peer [ verbose ] [ process-id | vpn-instance vpn-instance-name ] command to check information about IS-IS neighbors.
Run the display isis interface [ [ verbose | traffic-eng ] ^* | te-tunnel ] [ process-id | vpn-instance vpn-instance-name ] command to check information about IS-IS interfaces.
Run the display isis route [ process-id | vpn-instance vpn-instance-name ] ipv6 [ topology topology-name ] [ verbose | [ level-1 | level-2 ] | ipv6-address [ prefix-length ] ] ^* [ | count ] command to check information about IS-IS routes.