After an L2VPN accesses multiple L3VPNs through sub-interfaces
for VLAN tag termination, you can view the binding relationship between
the VE interface and the VE-Group, and termination information on
VE sub-interfaces.
Procedure
- Run the display virtual-ethernet ve-group [ ve-group-id | slot slot-id ] command to check the binding relationship
between VE interfaces and a VE-Group.
- Run the display dot1q information termination [ interface interface-type interface-number [.subinterface-number ] ] command to check the information about the Dot1q termination
on VE sub-interfaces.
- Run the display qinq information termination [ interface virtual-ethernet interface-number.subinterface-number ] command to check information about QinQ termination on VE sub-interfaces.