After configuring Layer 2 multicast entry limit, verify information such as the limit on the number of multicast groups.
Prerequisites
The Layer 2 multicast entry limit has been configured.
Procedure
- Run the display l2-multicast limit vlan [ vlan-id1 [ to vlan-id2 ] [ interface interface-type interface-number ] ] command to check Layer 2 multicast entry limit configurations and statistics in a specified VLAN.
- Run the display l2-multicast limit vsi [ vsi-name [ interface interface-type interface-number ] ] command to check Layer 2 multicast entry limit configurations and statistics in a specified VSI.
- Run the display l2-multicast limit interface interface-type interface-number command to check Layer 2 multicast entry limit configurations and statistics on a specified interface or sub-interface.
- Run the display l2-multicast limit vsi [ vsi-name [ remote-peer ip-address [ negotiation-vc-id vc-id ] ] ] command to check Layer 2 multicast entry limit configurations and statistics on a remote peer.
- Run the display l2-multicast limit [ configuration | statistics ] command to check all Layer 2 multicast entry limit configurations and statistics.