After MLD snooping is configured, you can view the router port and member port lists, forwarding table, and querier parameters.
Prerequisites
MLD snooping has been configured.
Procedure
- Run the display mld-snooping [ vlan [ vlan-id ]] [ configuration ] command to check MLD snooping parameters in a specified VLAN.
- Run the display mld-snooping [vsi [ vsi-name ] ] [ configuration ] command to check all configured MLD snooping parameters in a specified VSI.
- Run the display mld-snooping router-port { vlan vlan-id | vsi vsi-name } command to check information about router ports in a specified VLAN/VSI.
- Run the display mld-snooping port-info [ vlan vlan-id [ group-address group-address ] | vsi vsi-name [ group-address group-address ] ] [ verbose ] command to check information about ports in a specified VLAN/VSI.
- Run the display mld-snooping qinq-port-info interface interface-type interface-number [ group-address ipv6–group-address ] command to check multicast entries on a specified QinQ/dot1q VLAN tag termination sub-interface.