Clearing MLD Snooping Entries
Clear MLD snooping entries if they are not needed.
Usage Scenario
Clearing MLD snooping entries in a VLAN/VSI may interrupt services.
After the entries are cleared, hosts in the VLAN/VSI fail to receive multicast flows temporarily. The hosts can receive multicast flows again only after they send MLD Report messages and the device re-generates forwarding entries.
Procedure
- To clear dynamic MLD snooping entries, run the reset mld-snooping group { vlan { vlan-id | all } | vsi { name vsi-name | all } | all } command in the user view.