Configuring Alarm Thresholds for Layer 2 Multicast

This section describes how to configure alarm thresholds for Layer 2 multicast.

Context

To configure alarm thresholds for the total number of global entries in all VSIs of Layer 2 multicast, the total number of listened users on each board, and the total number of users in each multicast group, run the l2-multicast all-si limit threshold-alarm command. The default alarm trigger and clear thresholds are 75% and 70% for all VSIs of Layer 2 multicast, respectively.

Procedure

Configure alarm thresholds for the total number of global entries in all VSIs of Layer 2 multicast.
1. Run system-view
  The system view is displayed.
2. Run l2-multicast all-vsi global-entry limit threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value
  Alarm thresholds are configured for the total number of global entries in all VSIs of Layer 2 multicast.
3. Run commit
  The configuration is committed.
Configure alarm thresholds for the total number of listened users on each board of Layer 2 multicast.
1. Run system-view
  The system view is displayed.
2. Run l2-multicast all-vsi listened-user-per-group limit threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value
  Alarm thresholds are configured for the total number of listened users on each board of Layer 2 multicast.
3. Run commit
  The configuration is committed.
Configure alarm thresholds for the total number of listened users in each multicast group of Layer 2 multicast.
1. Run system-view
  The system view is displayed.
2. Run l2-multicast all-vsi listened-user-per-slot limit threshold-alarm upper-limit upper-limit-value lower-limit lower-limit-value
  Alarm thresholds are configured for the total number of listened users in each multicast group of Layer 2 multicast.
3. Run commit
  The configuration is committed.