Verifying the LDP LSP Configuration

After configuring an LDP LSP, you can view information about LDP and the LSP.

The LDP LSP has been established.

Run the display mpls ldp [ all | all verbose ] command to check information about LDP.
Run the display mpls ldp lsp [ destination-address mask-length | all ] command to check information about LDP LSPs.
Run the display mpls ldp lsp inbound-policy command to check information about the LSPs that have passed an inbound policy.
Run the display mpls lsp [ verbose ] command to check information about LSPs.
Run the display mpls ldp lsp fault-analysis ip-address mask command to check the cause for an LDP LSP establishment failure.