Configuring a Client PE to Establish an MP-IBGP Peer Relationship with the RR

You can configure a PE to establish an MP-IBGP peer relationship with an RR so that the PE can receive VPNv6 routes reflected by the RR.

Perform the following steps on each client PE:

Run system-view
The system view is displayed.
Run bgp as-number
The BGP view is displayed.
Run peer ipv4-address as-number as-number
The RR is specified as a BGP peer.
Run peer ipv4-address connect-interface interface-type interface-number
The interface used to establish a TCP connection is specified.
Run ipv6-family vpnv6
The BGP-VPN IPv6 address family view is displayed.
Run peer ipv4-address enable
The function to exchange VPNv6 routes with the RR is enabled on the PE.
Run commit
The configuration is committed.