Configuring an RR to Establish MP-IBGP Peer Relationships with All Client PEs

You can configure an RR to establish MP-IBGP connections with all its client PEs to reflect VPNv6 routes.

Context

Choose either of the following methods to configure an RR to establish MP-IBGP peer relationships with the client PEs.

Procedure

Configure the RR to establish an MP-IBGP peer relationship with a peer group.
Add all the client PEs to a peer group and establish an MP-IBGP connection with the peer group.
1. Run system-view
  The system view is displayed.
2. Run bgp as-number
  The BGP view is displayed.
3. Run group group-name [ internal ]
  An IBGP peer group is created.
4. Run peer group-name connect-interface interface-type interface-number
  The interface used to establish a TCP connection is specified.
5. Run ipv6-family vpnv6
  The BGP-VPN IPv6 address family view is displayed.
6. Run peer group-name enable
  The function to exchange BGP IPv6 VPN routes between the RR and the peer group is enabled.
7. Run peer ipv4-address group group-name
  The peer is added to the peer group.
8. Run commit
  The configuration is committed.
Configure the RR to establish an MP-IBGP peer relationship with each client PE.
Perform Step 1 to Step 6 repeatedly on the RR to establish an MP-IBGP connection between the RR and each client PE.
1. Run system-view
  The system view is displayed.
2. Run bgp as-number
  The BGP view is displayed.
3. Run peer ipv4-address as-number as-number
  The client PE is specified as a BGP peer.
4. Run peer ipv4-address connect-interface interface-type interface-number
  The interface used to establish a TCP connection is specified.
5. Run ipv6-family vpnv6
  The BGP-VPN IPv6 address family view is displayed.
6. Run peer ipv4-address enable
  The function to exchange BGP IPv6 VPN routes between the RR and the client PE is enabled.
7. Run commit
  The configuration is committed.