Verifying the Configuration of MPLS-TP OAM for a PW

After configuring Multiprotocol Label Switching Transport Profile (MPLS-TP) operation, administration and maintenance (OAM) for a pseudo wire (PW), verify the configurations by querying performance statistics and fault detection information.

Prerequisites

MPLS-TP OAM has been configured for a PW.

Procedure

Run the display mpls-tp oam current-alarm command to check alarms associated with a MEG.
Run the display mpls-tp oam me brief command to check information about maintenance entities (MEs) in a MEG.
Run the display mpls-tp oam meg command to check MEG information on the MEP.
Run the display mpls-tp oam meg meg-name statistic-type command to check MPLS-TP OAM performance statistics.