After configuring source active (SA) message parameters, verify information about and the number of (S, G) entries in the SA cache and check details about MSDP peers.
Prerequisites
SA message parameters have been configured.
Procedure
- Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-cache [ group-address | source-address | { as-number-plain | as-number-dot } ] * command to check information about (S, G) entries in the SA cache.
- Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-count [ as-number-plain | as-number-dot ] command to check the number of (S, G) entries in the SA cache.
- Run the display msdp [ vpn-instance vpn-instance-name | all-instance ] peer-status [ peer-address ] command to check detailed information about MSDP peers.