Rosen MVPN Configuration

With wide applications of the VPN technology, the requirements for operating multicast services over the VPN are increasingly stringent. Multicast VPN is mainly used in the Border Gateway Protocol (BGP)/Multiprotocol Label Switching (MPLS) VPN for multicast data transmission.

Overview of IPv4 Multicast VPNs: This section describes the concept of an IPv4 multicast VPN and the network conditions that must be met for IPv4 multicast VPN implementation.

Configuration Precautions for Rosen MVPN

Configuring an MD VPN: A router uses multicast domain (MD) to implement multicast VPN in Any-Source Multicast (ASM) mode, and in this situation multicast data of private networks can be transmitted over public networks.

Configuring BGP A-D Multicast VPN: The configuration of BGP A-D multicast VPN enables the Auto Discovery (AD) of PEs on the same VPN and allows multicast VPN services to run in public network tunnels based on PIM-SSM distribution trees.

Configuring MVPN Extranet: To enable a service provider on a VPN to provide multicast services for users on other VPNs, configure MVPN extranet.

Maintaining an IPv4 Multicast VPN: Maintaining an IPv4 multicast VPN involves deleting IPv4 multicast VPN statistics, monitoring the running status of the IPv4 multicast VPN, and controlling the generation of logs.

Configuration Examples for an IPv4 Multicast VPN: This section provides examples for configuring an IPv4 multicast VPN in an AS.

Parent Topic: IP Multicast

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic Next topic >