Configuration Examples for an IPv4 Multicast VPN

Example for Configuring Single-AS MD VPNs

This section provides an example for configuring single-AS multicast domain (MD) VPN on an MPLS/BGP network to enable the transmission of multicast data of private networks over a public network to receivers.

Example for Configuring Multicast VPN in MDT-SAFI A-D Mode

The MDT-SAFI A-D mode can be adopted to deploy the multicast VPN in network. In this manner, the multicast VPN PE information can be automatically discovered, the PIM-SSM MDT can be established on the public network, and multicast VPN services can be transmitted.

Example for Configuring MVPN Extranet in the Remote Route Leaking Scenario Where a Source VPN Instance Needs to Be Configured on a Receiver PE

This section provides an example for configuring MVPN extranet in the remote route leaking scenario where a source VPN instance needs to be configured on a receiver PE.

Example for Configuring MVPN Extranet in the Local Route leaking Scenario Where the Source and Receiver VPN Instances Reside on the Same PE

This section provides an example for configuring MVPN Extranet in the local route leaking scenario where the source and receiver VPN instances reside on the same PE.

Example for Configuring MVPN Extranet in the Local Route leaking Scenario Where the Multicast Source Belongs to the Public Network Instance

This section provides an example for configuring MVPN Extranet in the local route leaking scenario where the multicast source belongs to the public network instance.