After configuring provider backbone bridge Ethernet VPN
(PBB-EVPN), check the operating status and information about PBB-EVPN
functions.
Prerequisites
PBB-EVPN has been configured.
Procedure
- Run the display default-parameter evpn command
to check default PBB-EVPN configurations during PBB-EVPN initialization.
- Run the display evpn vpn-instance [ name vpn-instance-name ] command to check EVPN instance
information.
- Run the display evpn vpn-instance name vpn-instance-name df result [ esi esi ] command to check the designated forwarder (DF) election
result of an I-EVPN instance.
- Run the display bgp evpn { all | vpn-instance vpn-instance-name } esi [ esi ] command
to check information about the ESIs of a specified or all EVPN instances.
- Run the display bgp evpn { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table [ { ad-route | es-route | inclusive-route | mac-route } prefix ] command to check EVPN route information.
- Run the display bgp evpn all routing-table statistics command to check EVPN route statistics.
- Run the display evpn mac routing-table command
to check MAC route information of EVPN instances.
- Run the display evpn mac routing-table limit command
to check MAC address limits of EVPN instances.
- Run the display bgp evpn { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table mac-route backbone-source-mac [ mac-address ] command to check EVPN B-MAC route information.