On a P2P network, IP addresses of interfaces at the two ends of a link may belong to different networks. Therefore, the two ends can receive packets from each other only when the check on the source addresses of RIP packets is disabled.
By default, RIP checks the source addresses of received packets, and the local RIP interface receives only the packets from the same network. On a P2P network, IP addresses of interfaces at the two ends of a link may belong to different networks. Therefore, the two ends can receive packets from each other only when the check on the source addresses of RIP packets is disabled.
The system view is displayed.
A RIP process is created, and the RIP view is displayed.
The check on the source address of RIP packets is disabled.
The configuration is committed.