Clearing RIP
If you want to clear information about RIP, run the reset commands in the user view.
Context
RIP information cannot be restored after you clear it. Therefore, exercise caution when running the following commands.
Procedure
- Run the reset rip { process-id | all } configuration command to reset the configuration parameters of the specific RIP process. When the RIP process is initiated, the default configuration parameters are restored to the default values.
- Run the reset rip { process-id | all } imported-routes command to clear the routes imported from other routing protocols and then import these routes into RIP again.
- Run the reset rip { process-id | all } statistics [ interface interface-type interface-number ] command to clear the statistics of the counter that is maintained by a particular RIP process. This command helps to re-collect statistics during debugging.